Home > Sat-Link Software Support
■ Auto: According to the user db of satellite, search channel. ■ Zoom: Enlarge showing the strength and quality. USER’S MANUAL 13-Digital Satellite Meter Digital Satellite Meter-14 Press key to select the desired satellite, and press “OK” key, then you can see the information of the satellite you select. Digital LCD Satellite Finder Meter Plus Download And Watch All FTA Digital Satellite Channels On Colour LCD Screen Satlink WS-6906 Description. First Time Available On Any Low Priced Satellite Meter That You Are Able To:. View the actual channel on the screen of the meter.
Sat Finder,Sat-link Digital Satellite Meter Software
Australia,USA,Canada,UK,Ireland & Europe Sat-Link Support Site For LCD Digital Satellite Finder Meters & LCD Digital Terrestrial Aerial Finder Meters.
Free downloadSatLink WS-6902,SatLink WS-6906,SatLink WS-6908,SatLink WS-6905,SatLink WS-6909,SatLink WS-6912 English Manual,Update file,Update programm + Editor,Satellite list,Firmware etc.
Free downloadSatLink WS-6902,SatLink WS-6906,SatLink WS-6908,SatLink WS-6905,SatLink WS-6909,SatLink WS-6912 English Manual,Update file,Update programm + Editor,Satellite list,Firmware etc.
Digital Satellite Signal Meter Finder
Peavey nashville 400 user guide manual. Sat-Link Software
- English Manual: ws9632manual.pdf Download
CD content: cd_6932.rar free download - English Manual: ws9622manual.pdf Download
CD content: cd_6922.rar free download - English Manual: ws6936manual.pdf Download
CD content: cd_6936.rar free download - English Manual: ws6939manual.pdf Download
CD content: cd_6939.rar free download - English Manual: ws9618Pmanual.pdf Download
CD content: cd_6918P.rar free download Bushnell neo ion gps watch user manual. - English Manual: ws9602manual.pdf Download
CD content: cd_6902.rar free download - CD content:6906-software-AU.rar free download
6906-software-EU.rar free download - English Manual:ws_9608_manual.pdf free download
CD content:cd_6908.rar free download - English Manual:ws_9609_manual.pdf free download
CD content:cd_6909.rar free download Canon powershot sx20 is users manual. - CD content:cd_6912.rar free download
SatLink tips:
SatLink WS-6909 DVB-S&T Combo Meter
It is a battery powered hand held Satellite adjustment meter demodulating DVB-S and DVB-T Signal. It's veryconvenient for installer to catch the signal quickly andaccurately and adjust the antenna to the best position.It's with microprocessor controller, reliable and stable performance. When it's turned on, channel picture, Signal Strength and Signal Quality can be showed on LCD Screen a fter you set up your local DVB-S or DVB-T Parameter. Also, it enables you to select large menu window for data figure which is helpful for adjustment.
It shows Azimuth and Elevation, CBER/VBER, Singal Quality, Signal Strength and signal lock sound forDVB-S, And for DVB-T channel picture, Signal Strength and Signal Quality can be showed on LCD Screen after you set up your local DVB-T Parameter. Also, it can at most show five channels' signal at the same menu which is very helpful for adjustment.
For DVB-S it can detect very faint signal, and supports antenna power OFF/13V/18V selectable and it's with auto-protection for LNB shortcircuit.
For DVB-T it can detect very faint signal, and supports antenna power OFF/5V/12V/15V/18V/24V selectable and it's with auto-protection for antenna short-circuit.
It includes both AV IN and AV OUT for Camera, monitor…etc
It's used with 12V Power Adaptor when you need to use external power.
It includes high capacity Lithium Battery 8.4V 3000mAh which works for more than 4 hours after it's fully charged.
SatLink WS-6908 DVB-S FTA Digital Satellite Finder
It is a battery powered hand held Satellite alignment meter demodulating DVB-S Signal. It's very convenient for installer to catch quick and accurate Alignment for Antenna to the best position.
It's with microprocessor controller, reliable and stable performance. When it's turned on, channel picture,Signal Strength and Signal Quality will be showed on LCD Screen after you set up your local DVB-S Parameter. Also, it enables you to select big menu window for data figure which is helpful for alignment.
It shows Azimuth and Elevation, CBER/VBER, S/N,Signal Strength and signal lock sound
It detects very faint signal, and supports antenna power OFF/13V/18V selectable.
It's with auto-protection for LNB short-circuit.
It includes both AV IN and AV OUT for Camera,LCD…etc
It's used with 12V Power Adaptor when you need to use external power.
It includes high capacity Lithium Battery 8.4V3000mAh which works for more than 4 hours after it's fully charged.
It is a battery powered hand held Satellite adjustment meter demodulating DVB-S and DVB-T Signal. It's veryconvenient for installer to catch the signal quickly andaccurately and adjust the antenna to the best position.It's with microprocessor controller, reliable and stable performance. When it's turned on, channel picture, Signal Strength and Signal Quality can be showed on LCD Screen a fter you set up your local DVB-S or DVB-T Parameter. Also, it enables you to select large menu window for data figure which is helpful for adjustment.
It shows Azimuth and Elevation, CBER/VBER, Singal Quality, Signal Strength and signal lock sound forDVB-S, And for DVB-T channel picture, Signal Strength and Signal Quality can be showed on LCD Screen after you set up your local DVB-T Parameter. Also, it can at most show five channels' signal at the same menu which is very helpful for adjustment.
For DVB-S it can detect very faint signal, and supports antenna power OFF/13V/18V selectable and it's with auto-protection for LNB shortcircuit.
For DVB-T it can detect very faint signal, and supports antenna power OFF/5V/12V/15V/18V/24V selectable and it's with auto-protection for antenna short-circuit.
It includes both AV IN and AV OUT for Camera, monitor…etc
It's used with 12V Power Adaptor when you need to use external power.
It includes high capacity Lithium Battery 8.4V 3000mAh which works for more than 4 hours after it's fully charged.
SatLink WS-6908 DVB-S FTA Digital Satellite Finder
It is a battery powered hand held Satellite alignment meter demodulating DVB-S Signal. It's very convenient for installer to catch quick and accurate Alignment for Antenna to the best position.
It's with microprocessor controller, reliable and stable performance. When it's turned on, channel picture,Signal Strength and Signal Quality will be showed on LCD Screen after you set up your local DVB-S Parameter. Also, it enables you to select big menu window for data figure which is helpful for alignment.
It shows Azimuth and Elevation, CBER/VBER, S/N,Signal Strength and signal lock sound
It detects very faint signal, and supports antenna power OFF/13V/18V selectable.
It's with auto-protection for LNB short-circuit.
It includes both AV IN and AV OUT for Camera,LCD…etc
It's used with 12V Power Adaptor when you need to use external power.
It includes high capacity Lithium Battery 8.4V3000mAh which works for more than 4 hours after it's fully charged.
Relate Products
in Technical#1
I have recently purchased one of these meters. Not a bad performer considering the cost. The instructions are to say the least hopeless. Has anybody got one of these? and if so is it possible to alter the screen brightness,I've pressed everything but still can't brighten the image. Thanks
Satlink Ws 6906 User Manual
Comments
Sutron Satlink 3 Manual
- #2I have a similar model, the WS-6908. So far as I have been able to discover there is no way of adjusting the screen brightness. In fact there are various comments on the Internet complaining about the difficulty in seeing the screen in strong light and some confirm that the brightness can't be adjusted.
I agree that the device is nevertheless pretty good (for the occasional dish set-up) and that the instructions are near to useless! I have created my own aide-memoires, one on the various functions and another on how to use the meter, derived from comments on on-line forums. Happy to send them to you by PM. - #30
- #4Hi Pollux,
Could you please send me a copy of your aide-memoire - just about to use my WS-6906 for the first time and the instructions really don't help much.
Thanks very much in anticipation! - #5Oops - I can't see any way to add attachments! French Sky and smaltby, please see your PMs anyway, where you'll find my e-mail address. If you'd kindly send a mail to that address I'll reply with the aide-memoires.
Sorry to be awkward! - #6I've just found this link to a French user guide for the WS-6906.
http://www.pce-france.fr/manuels/manuel-ws-6906.pdf
It's a bit better than the guide that comes with the meter, but it still doesn't describe how to use the device to do a dish setup. Nevertheless, it's very polite - I lost count of how many 'S'il vous plait's it contains! - #7Guys, I've updated my 'personal user guide'. Here it is:
First of all, you need to scan in some channels, including Sky News and BBC1 (I suggest adding BBC2, ITV1 and Channel 4). They should be already in the meter but some of the frequencies changed recently and the details in the meter are probably wrong. Connect the meter to a working dish.
Click the Menu button and then select 'Satellite install' then TP Manager. Check that the satellite is the right one. If not, use the < > buttons to select it (probably appears as Astra 2A etc on your meter), then go down to find Freq 10773. Click F4 to do a scan - this should pick up BBC1, BBC2 and BBC4 and a few others. Then find Freq 12207 (on my meter it's 12205, which is close enough!). F4 again to scan and pick up Sky News etc.
Then find Freq 10758 (10757 on mine). F4 to scan and get ITV1, ITV2 and ITV4. Finally, find Freq 10714 (10713 on mine). F4 to get Channel 4. Press Exit until you get back to the TV screen. Using the up and down buttons you should be able to move between these selected channels and see and hear them on the screen.
To line up a dish you need to connect up to the dish, click the Menu button and then select 'Quick search' on the screen. Check that you are on the right satellite (if not, use the < > buttons) and that the LNB type is Universal. Go down to 'Frequency' and enter 12207. Then enter 27500 for Symbol Rate. Go further down (next screen) and set Polarity to V. These are the settings for Sky News. Don't change anything else!
Then press OK and the screen will show the Signal Strength and Quality. You need now to move the dish to maximise both of these. You may prefer to see the numbers rather than the bars: to do that, use the > button to move to Zoom and press OK.
Once you've lined up on Sky News, exit out until you get to the TV screen and check that image and sound are OK. Then repeat the process for one of the more sensitive channels, such as BBC1 (Frequency 10773, Symbol Rate 22000, Polarity H). Having done that you can check that this and the other channels appear OK on the TV screen. - #8And here is my summary of the Info, < > and Function buttons and what they do when the 'TV screen' is displayed. Hope it makes sense!
(To view the TV display from main menu, press Exit)
INFO Channel and signal info
< > Volume
F1 Teletext
F2 Subtitles
F3 Channel list
F4 TV guide (EPG)
When the channel list is displayed (F3) there is a 'Tool' option which offers various functions related to the channels, similar to those in satellite receivers. These functions can be selected by using the < > buttons:
Favourite
Lock
Edit
Move
Sort
Invisible
Delete
Search - #9Hi guys.
I also have a WS-6908SE which arrived yesterday, Have to admit it looks brilliant for the money. Now it is charged fully I am off out to play with it, I concur that the manual it came with is totally unsatisfactory.
Last week I bought a new 130cm dish and managed to set it up with a metronic £10 finder but being a gadget freak just had to buy this.
I may end up motorising the dish next.
Thanks for the heads up on instructionsProbably be back later with some quetions!
Terry